[Skip to content]
 Home
 News Index
 Our researched articles
 Science (General)
   List of studies
   Basic guide to EMFs
   EMF guidance levels
   RF unit conversion
   FAQs
   Other resources
 ELF ("Power" EMFs)
   Overview
   Powerlines
   Substations
   Electrical wiring
   Electrical appliances
 RF ("Microwave" EMFs)
   Overview
   WiFi
   Mobile phones
   Cordless phones
   Mobile phone masts
   Other resources
 Health
   Childhood leukaemia
   Brain tumours
   Electromagnetic sensitivity
   Other health effects
 Action
   Reduce your exposure
   - Mobile phones
   - Phone masts
   - Powerlines

Valid XHTML 1.0! Valid CSS!

- Liability disclaimer -
- Privacy policy -
- Cookies policy -
© Copyright Powerwatch 2024

Powerwatch Forums - View Thread - How far should a house be from a cell mast and/or telephone co. microwave statio

[Back to Forums Main Index]
[Back to Powerwatch Open Forum Index]

How far should a house be from a cell mast and/or telephone co. microwave statio

Post Time: 20/10/2010 01:03:54
tsim
Total Forum Posts: 11
Greetings,

We are continuing to look for a house here in the states for my chemically and electrically sensitive wife.

We have two possibilities, but one is close to a large cell mast and a telephone company microwave antenna (not sure what this is, has big dish on it pointing away from the house). The distance is about 0.7 miles and was wondering if that is too close?

And more generally, what is a safe distance? In this case there are trees around, and there is not a line of sight to either tower. The two towers are close together, so the distances are essentially the same.

The other house, also surrounded by trees, is about 1.2 miles from the closest antennas, we are assuming that is a safe distance, or is it still not?

Many thanks for ideas and input.

- Tom and Sandra
Post Time: 06/01/2011 11:17:55
Jean Philips
Total Forum Posts: 22
There is not a 'safe' distance as there are always many factors to take into consideration. E.g. number of antennas/companies and systems, angle of tilt, both physical and electronic, power of transmitters, reflective/absorbtive surfaces in the vicinity, height of the transmitter in comparison to the property, etc.
The only way to know for sure what you will be exposed to is to measure the fields.
On the whole, dishes use very tightly focused beams that pass signals from one transmitter to the next. Very little reaches the ground (mechanical imperfections may create some ground exposure). They are ugly though and a psychological reminder, no small thing.